 |
Advance in Patient Care
“The FMS has truly changed our practice here (Southeastern State University Medical Center) and represents a significant advance in our ability to care for patients requiring significant intraoperative fluid and .... More
The Anesthesiology Practice at a Major ....
“Switched from the Level 1 to the Belmont Rapid Infuser about three months ago. We purchased two, one for our main O.R. and one for Obstetrics. We have already used it in a case requiring more than 32 units of blood. It was .... More
Soldiers are Alive Today Because of the ....
“We were able to sustain their lives long enough so the surgeons could fix them. When we were in Baghdad we pumped over 100 units of blood products through the Belmont on this single patient,and ten years ago…he would .... More
Key Features of the Belmont® Rapid Infuser
Model: FMS 2000
Built in high flow pump - Controls flow rate.
Two air detectors - One at the inflow detects, and alerts the user, if out of fluid. The other air detector checks for air in the fluid line before it enters the patient.
Positive air removal - At any air detection, system valve automatically closes the line to the patient and pumps air back to the reservoir. With a touch of a button, the system is pumping and warming again.
Line pressure monitoring - System alarms and advises user when infusion line is kinked or blocked.
Super efficient heat exchanger- System warms even 10°C fluid to 37.5°C at all flow rates from 10 ml/min to 1,000 ml/min with dry heat - no water bath.
Infrared temperature sensors - Measure temperature without contact with the infusate.
Display - Shows flow rate, total volume infused, temperature and line pressure.
Ease-of-use - The display screen prompts the user through the set-up, system prime, and the patient line prime. Also, if alarm occurs, it shows alarm message with pictorial diagrams assisting with troubleshooting.
Proudly made in the USA