TECHNICAL SPECIFICATIONS
|
DIMENSIONS |
|
| Size | |
| Battery Housing: |
3.29” x 7.6” x 1.68” |
| Battery: | 3.1” x 5.9” x 0.89” 7.9 x 15.0 x 2.3 cm |
| Heater Unit: | 1.5” x 5.2” x 0.87” 3.8 x 13.2 x 2.2 cm |
| Total Weight | 1.7 lb |
| POWER | |
| Battery Nominal Voltage: | 14.4 VDC |
| Electrical Compliance: | EN 60601-1, UL60601-1, CAN/CASA C22.2-NO. 601.1-M90 |
| Battery Recharge: | Approximately 2.5 hrs. |
| ENVIRONMENTAL | |
| Operating Temperature: | 10° to 35°C |
| Relative Humidity: | 10% to 80% RH |
| Pressure: | 49 to 103 kPa |
| Storage Temperature: | -10°C to 40°C |
| Shock and Vibration: | ISTA Pre-shipment Test Procedure, Test procedure 1, 1996 |
| Electromagnetic Compatibility: | EN 60601-1-2 |
| ENVIRONMENTAL | |
| Operating Temperature, Humidity: | 10° to 35°C, 10% to 70% RH |
| Shock and Vibration: | ISTA Test procedure 1, 1996 |
| Electromagnetic Compatibility: | EN60601-1-2 |
| Protection from water Ingress: | IPX1, Drip Proof |
| OPERATING PARAMETERS | |
| Flow Rate – AC | |
| Input Temperature 20°C: | Max 80 ml/min |
| Input Temperature 10°C: | Max 50 ml/min |
| Output Temperature: | 38° +/-2°C |
| Prime Volume: | 4 ml without tubing, 7.5 ml with valves and tubing at the input and output |
| ALARM CONDITIONS | |
| Check for Air | Over Temperature |
| No Heat | Probe Fault |
| DISPOSABLE SET | |
| General: | Sterile, Non-Pyrogenic Fluid Path, Single-Patient Use Only |
| ORDERING INFORMATION | |
| buddy liteTM System: | P/N 905-00017 |
| buddy liteTM Sets: | P/N 905-00010, NSN 6515-01-5424545 |
|
Call |
|